The Toolbox Assistive Technology Database logo

Back   |   Search   |   View by Category   |   Technical Articles
A-Frame Tool Holder
This A-frame-shaped holder and its various contents shown as described.

An A-Frame Tool Holder provides Colfax, IL, farmer Jim Kraus quick and easy access to his tools. The wheeled holder is constructed of 3/4-inch plywood on a frame made of 2 x 4s with two upper inside shelves at the ends (roughly 12 inches deep) used to hold pliers and chisels. The bottom shelf (extending the full length of the holder) provides storage for long-handled tools, crowbars, and pieces of pipe. On the front and back of the holder are hooks for hanging wrenches, pliers, hammers, tape, and other tools and supplies. A 1 x 2 board attached to the front creates a shelf for sockets. Similarly, a 1 x 3 board with holes drilled through it holds screwdrivers in an upright position.

Estimated Cost Cost range: See below

Limitations Limitations Addressed by Product: Lower extremity, Visual

SourceJim Kruse
Jim Kruse
R.R. 2, Box 243
Colfax, IL, 61728
Last updated: Aug 30, 2022

Back   |   Search   |   View by Category   |   Technical Articles