The Toolbox Assistive Technology Database logo

Back   |   Search   |   View by Category   |   Technical Articles
Sweep Action Tine Grapple for Skid Steers
Sweep Action Tine Grapple for Skid Steers

The hydraulically-powered, spring-and-hinge Sweep Action Tine Grapple (SATG) keeps the front rake of the sweep clamp open during use until the rear section of the clamp is either closed or contacts the material being handled. The cylinder then overcomes the spring pressure, causing the front rake to rotate towards the bucket in a sweeping motion moving material in and retaining it in the bucket. The SATG is available in three widths (72, 78, and 84 inches) and either open-tine and solid-bottom models.

Estimated Cost Cost range: See below

Limitations Limitations Addressed by Product: Lower extremity, Upper extremity, Strength/endurance, Back

SourceWorksaver, Inc
P.O. Box 100
9 Worksaver Trail
Litchfield, IL, 62056
Est. Cost$3,700-$4,500, depending on width
Last updated: Feb 22, 2022

Back   |   Search   |   View by Category   |   Technical Articles