The Toolbox Assistive Technology Database logo

Back   |   Search   |   View by Category   |   Technical Articles
Wago Push Wire Connectors
Wago Push Wire Connectors

Wago Push Wire Connectors eliminate the need to twist wires together then cap with wire nut or electrical tape. Available with 2, 4, 6, and 8 ports, these connectors accommodate various-size solid and strand electrical wires for junction box, low-voltage lighting system, wall-mounted consumer unit, and power distribution connections. Each connector has a testing point in its housing, which is transparent to allow visible indication that the conductor is secure. To connect, one strips the wire of insulation at the length desired then pushes it into one of the ports; removal is accomplished by twisting and pulling the wire out at the same time.

Estimated Cost Cost range: See below

Limitations Limitations Addressed by Product: Upper extremity, Strength/endurance


SourceWago Corporation
N120 W19129 Freistadt Road
Germantown, WI, 53022
Websitewww.wago.us
Emailinfo.us@wago.com
Phone800-346-7245
262-255-6222
Fax262-255-3232
Est. Cost$0.25-$1.50, depending on type and quantity
Last updated: Jun 21, 2018


Back   |   Search   |   View by Category   |   Technical Articles