The Continuous-Scoop Feed Bunk Cleaner, the frame of which attaches to a loader bucket via universal mounts (provided), is designed to remove approximately 75% of crusted-over snow and/or chunks of feed to allow a bunk blower or sweeper to make one non-stop pass without damaging the blower tube or sweep brushes. The unit has 8 inches of rubber on both sides of the arm that flexes back to wipe the sides of the bunk clean. This also ensures a soft point of contact between the bunk and the arm. The bottom of the arm is tapered up at a 45° angle to allow the arm to float over uneven bunks.