The Tractor-Implement PTO Link is designed to simplify the often-frustrating, time-consuming task of inserting the tractor's power-take-off spline into the trailing implement's receiver (and later, disconnecting). The device consists of: (1) the tractor's component-a round plate having four large holes plus one small hole and a hollowed-out shaft that slips over the spline; and (2) the implement's component-a round plate having four large knobs plus four small holes and a shaft that slips into the receiver. To link, the knobs on the implement component's plate are slipped through the large holes on the tractor component's plate; the implement's plate is rotated slightly to lock the two plates together; then the locked plates are secured with a pin run through the small hole in each plate.