Toolbox Home | About the Toolbox | Suppliers

Tractor Drawbar Hitching

Subcategories

No more subcategories found.

Products

Fastened to the hitch

Agri-Speed Hitch

Ready to be inserted into the receiver bolted onto the trailing implement’s tongue is the hitch that bolted onto the tractor’s drawbar.

Attach-Matic Hitch

Left pic of commercially made cotter-pin puller & Rt pic of homemade cotter-pin puller pulling a cotter-pin from a red piece of equipment

Cotter-Pin Puller

Pictured is tractor three-point hitch arms-mounted version of a commercial quad hitch.

Drawbar Quick Hitch

Ergo-hitch on back of tractor attached to drawbar on trailing implement.

Ergo-Hitch Self Hitch

Securing the tractor drawbar-implement tongue connection is the hitch pin

Han-D-Lok Hitch Pin

No Longer Produced

Drawing of the nut welded to the top of one of the implement’s jacks and a rachet wrench socket ready to be inserted over the nut.

Hay Implement Hookup Helper

Pictured is the Spotter placed on top of the implement’s tongue

Hitch Spotter and Portable Tongue Stand

No Longer Produced

Homemade Drawbar Clip Pin Remover

Ink drawing of the tool (its components positioned and welded together as described) about to be inserted into the lower hole at the end of the swivel hitch tongue.

Homemade Swivel-Hitch Hook-Up Tool

Tractor draw bar next to three-point hitch that has extra receiver attached.

Lazyman Hitch

Pictured is an NH3 tank attached behind a JD nutrient applicator on which is mounted the applicator-to-tank hose’s coupling/uncoupling device is mounted.

PitStop Pro Tendering System

Pictured is the trailing implement’s tongue attached via pin to the bottom frame of the large

Quad-Hitch

Left pic of red tractor hitch and trailer tongue held together with quick-release hitch pin. Rt pic of silver quick-release hitch pin showing its 4 pieces on cement floor. Handle. Hitch-pin. Cotter key. Quick-release pin with short cable attached.

Quick-Release Hitch Pin

Ready to be inserted into the receiver bolted onto the trailing implement’s tongue is the hitch that bolted onto the tractor’s drawbar.

Stafast Hitch

Pictured is the tractor-mounted device hooked up as described to an implement and now raised to normal towing level.

Three Point and PTO Quick Hitch

No Longer Produced

Ink drawing of where the tractor drawbar and trailing implement are connected showing the hitch pin as described.

Top-Hook Hitch Pin

Pictured is the handle (as described) welded about 3 feet back from the end of the wagon tongue.

Wagon Tongue Handle

The spring

Wagon Tongue Lift-Spring Kit