Toolbox Home | About the Toolbox | Suppliers

Hitching

Subcategories

Tractor Loader Accessories

Tractor Drawbar Hitching

Power-Take-Off Shaft Coupling

Tractor Three-Point Hitching

Tractor/Truck Winch Hitching

Tractor Hydraulic Connectors

Products

Fastened to the hitch

Agri-Speed Hitch

Pictured is the NH3 applicator implement (a chisel plow) with the cable winch spooling device affixed just behind the NH3 tank’s receiving unit.

Anhydrous Ammonia Tank Winch

No Longer Produced

Pictured are the system’s four component parts (a-b-c-d) as described.

Armatic Three-Point Quick-Hitch System

No Longer Produced

Ready to be inserted into the receiver bolted onto the trailing implement’s tongue is the hitch that bolted onto the tractor’s drawbar.

Attach-Matic Hitch

Red & black plastic box with handle on top - cable with hook in front and cable with hook in back and 24V battery-powered motor inside.

Battery-Powered Portable Winch

An adult male guides a PTO shaft into the receiver

Bungee Cord

Pictured is the device (modified as described) clamped onto a PTO collar-lock in order to depress the pin.

Collar-Lock Depressor

Back end of a John Deere tractor with Color-Coded Hydraulic Hose Couplers and a person's left gloved hand changing a line

Color-Coded Hydraulic Hose Couplers

Combi-Hitch Auto-Hitching System

Left pic of commercially made cotter-pin puller & Rt pic of homemade cotter-pin puller pulling a cotter-pin from a red piece of equipment

Cotter-Pin Puller

An adult male backs up the tractor with the male V-shaped unit to be raised and inserted into the female V-shaped unit once alignment is achieved

DeltaHook Rapid Hitch

Black and yellow skid steer in yard with an attachment looking like a half-circle with two arms attaching one third of the way in from the sides. Attachment can be raised or lowered with 2 hydraulic pistons.

Ditching/Backfilling Attachment

Pictured is tractor three-point hitch arms-mounted version of a commercial quad hitch.

Drawbar Quick Hitch

Gray & black winch with 1 hook on cable to left & 1 hook on winch case to right. Case has male axle for attaching to electric drill.

Drill-Powered Portable Winch

Easy-Change Hitching System components against a white background|Easy-Change Hitching System installed on a red farm implement attached to the back of a tractor.

Easy-Change Three-Point Hitching System

Pictured is the small pressure-release valve that inserts into the male hydraulic hose tip to facilitate proper coupling as described.

EasyConnect Hydraulic Coupler

No Longer Produced

Left pic of black adjustable-length bar with orange C-shaped ends with screws to tighten what is placed in the ends. Middle of the bar has a black handle with electrical wires running from it. Rt pic of same arm fastened between tractor lift arms.

Electric Lift-Arm Adjuster

Electric-Powered Grapple for Sub-Compacts

Ergo-hitch on back of tractor attached to drawbar on trailing implement.

Ergo-Hitch Self Hitch

Freedom Hitch

No Longer Produced

Securing the tractor drawbar-implement tongue connection is the hitch pin

Han-D-Lok Hitch Pin

No Longer Produced

Drawing of the nut welded to the top of one of the implement’s jacks and a rachet wrench socket ready to be inserted over the nut.

Hay Implement Hookup Helper

Pictured is the Spotter placed on top of the implement’s tongue

Hitch Spotter and Portable Tongue Stand

No Longer Produced

Homemade Drawbar Clip Pin Remover

Left pic of hands holding Homemade PTO Decoupler. Rt pic of Homemade PTO Decoupler attached to tractor PTO.

Homemade PTO Decoupler

Center pic of two U-shaped gray metal brackets loosely linked together. Left pic of brackets fastened to knuckle joint & locking collar ring. Rt pic shows side view of device on PTO shaft.

Homemade PTO Remover/Installer

2 pics of scissors-type automotive jack welded or bolted to tongue of equipment with half-moon metal piece on top of jack so that when raised it will lift PTO shaft to match and can then be lowered out of the way for operation.

Homemade PTO Shaft Lift Jack

Ink drawing of the tool (its components positioned and welded together as described) about to be inserted into the lower hole at the end of the swivel hitch tongue.

Homemade Swivel-Hitch Hook-Up Tool

The two legs of Platts’ triangular-shaped hitch are bolted to its drawbar frame

Homemade Versatile Three-Point Hitch

Hydra Power Top Link

1
2
3
Next »