Toolbox Home | About the Toolbox | Suppliers

Fencing and Gates

Subcategories

Cattle Guards and Drive-Over Gates

Wire Stretching and Mending

Post Driving and Extracting

Electric and Virtual Fence Equipment

Manual Gate Latches and Fasteners

Drive-Through Gates

Manual Gate Accessories

Powered Gate Openers

Products

A six-horizontal-bar fence with the 36-inch-wide

EZ Climb-Thru Gate

Two pictures of the tool

EZ Stretcher Fence Wire Tool

No Longer Produced

A metal fence-wire post with the Fence Buddy tool’s key components—the ratcheting mechanism

Fence Buddy

No Longer Produced

Pictured is a portion of an all-pipe fence

Fence Bullet No-Weld Pipe Fence Bracing System

Yellow fence wire unroller with a roll of barbed wire on it attached to back of garden tractor

Fence Wire Unroller

Pictured is the system’s 4- by 8-inch fence-mounted monitor; upper-left inset shows an adult male’s hand holding and in the process of programming the system’s app.

Fence-Alarm Electric Fence Monitoring System

Pictured is the device as described.

Fence-Wire Tightener

Bolted to the second board of the four-board gate is the latch assembly consisting of the foot-operated lever mechanism and the long spring-loaded rod

Foot-Operated, Self-Locking Gate Latch

Pictured mounted behind a utility tractor is the four-tiered jenny

Four-Tier Wire Spinning Jenny

2 free-standing portable fence panels out in a field

Freestanding Portable Fence Panels

Pictured is a wide open gate with the 4-foot-wide electrified rubber mat lying between the gate posts and cattle standing behind it

Gap Zapper Electric Cattle Guard

No Longer Produced

The piece of pipe welded to the metal plate mounted on the intercepting post

Gate Holder

Hinged to the gate post is the gate having affixed to its vertical end-frame a length of spiral spring clamped near the bottom and near the top running across to a length of chain hanging from a hook on the post.

Gate Shut Automatic Closer

Clamped partway up the latching end of a five-rail steel fence gate is a length of inch-diameter metal tubing that’s L-shaped at the bottom to which the gate wheel has been affixed.

Gate Wheel

GateHands Tube-Gate Latch System

Seen is the toolbox-looking device that’s strapped near to top of a round fence post of a wood-slat fence.

Gatekeeper

No Longer Produced

An adult male’s left hand holds the wire guide (via its handle) against the wooden fence post while with his right hand he hammers the staple into the post.

Hand-Held Fence Staple Driver

No Longer Produced

With his hand grasping the handle on each side of the driver

Hand-Held Gas-Powered Post Driver

Seen is an adult male on his knees pumping the device’s internal hydraulic-pump lever which ratchets up a square wooden post that’s collared to the device.

Hand-Operated Hydraulic Post Puller

Pictured is the vehicle-hitched

Heavy-Hitter Post Pounder

The device being 6 inches from the post with one end of the chain affixed to its jaw and the other end wrapped around the post’s base

Hi-Lift Manual Wood-Post Popper

His right hand holding the 4-foot-long device with barbed wire running parallel to it from hook to hook

Hired Hand Fence Stretcher

Schematic drawing of Breuer’s remote-controlled gate opening system

Homemade Electric Gate Opener

Ned stoller on left standing in brushy field looking at a homemade electric-fence netting mover.

Homemade Electric-Fence Netting Mover

A color cut-away drawing showing the crossbeam affixed to the loader-mounted pallet forks onto which is affixed the cylinder and clamp that will tighten around the post.

Homemade Fence Post Puller

Ink drawing of the metal-rod device

Homemade Gate Catcher

Ink drawing of the cattle guard cover

Homemade Hinged Cattle Guard Cover

Drawing of the device

Homemade Mud Free Gate Roller

Color drawing of white driver made of vertical angle-iron with a square flat cap welded on top - a round handle welded just below the top - & a footstep welded at the bottom. An orange electric fence post is shown next to it with yellow insulator.

Homemade Post Driver for Electric Fences

Pen sketch in blue ink of pickup truck bumper with receiver-hitch with a spool of wire sitting on it fastened by a drawbar pin secured with a cotter pin

Homemade Receiver-Hitch Wire Unroller